SOLDERINGSTATION+TINNINPUT

WSF 81D8 Soldering Station Set

The WSF 81D8 will dispense solder wire with a diameter of 0,8 mm to 1,5 mm. By switching over the operating mode and adjusting the heating element on the WSF soldering iron, the operator can switch between automatic (SFA) and continuous (SFC) solder supply at any time. In the operation mode “automatic” (SFA) the preset quantity of solder is fed by the activation of the finger switch (optional: foot switch or external contact). The required amount of solder can be continously adjusted from 1–10 mm. The feed interval is shown digital. In the operation mode “continous” (SFC) the solder feed is activated for as long as the finger switch (optional: foot switch or external contact) is activated. The speed of the feed rate can be continously adjusted and is shown digitally. The control unit is fitted with digital electronics for regulating the soldering iron temperature and solder feed operation.

Specifications:

• Dimensions: 120 x 217 x 199 mm (L x W x H)
• Mains supply: 230 V / 50 Hz
• Output voltage: 24 V
• Power: 100 W
• Temperature regulation: 50 ... 450 °C
• Temperature accuracy: 9 °C
• Equipotential bonding (normal state hard grounded)

Includes:

• transformer
• solder feeder WSF 2
• soldering iron WSFP 5 / WSFP 8 (LT-tips: standard LT-BX)
• holder AK