Aluminum Heatsink for Raspberry Pi

Out of stock
SKU: ADA3083
€2.23 €1.80 Excl. Tax Incl. Tax
Contact us
Quotations, additional product information and queries about larger quantities.
YE Sales [email protected]
+358 10 2891 220
Weight 1.8 g
Unit of measure Pcs
Product number ADA3083
Part number ADA3083
Brand Name ADAFRUIT

Espoo

By order

Delivery time: 30 business days

Pcs
€0.00 €0.00 Excl. Tax Incl. Tax
Description

Looking for a nice way to cool down your Raspberry Pi 3? Check out this 14x14x8 Heat Sink!

This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi  but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it may not work with other enclosures and most HATs will not fit on top with the heat sink installed.

We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.1 GHz (so, approx 14% higher performance)

Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips.

Product Dimensions: 14.0mm x 13.8mm x 8.2mm

Product Weight: 1.8g

Technical information

Product Dimensions: 14.0mm x 13.8mm x 8.2mm

Product Weight: 1.8g

Description
Technical information

Looking for a nice way to cool down your Raspberry Pi 3? Check out this 14x14x8 Heat Sink!

This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi  but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it may not work with other enclosures and most HATs will not fit on top with the heat sink installed.

We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.1 GHz (so, approx 14% higher performance)

Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips.

Product Dimensions: 14.0mm x 13.8mm x 8.2mm

Product Weight: 1.8g

Product Dimensions: 14.0mm x 13.8mm x 8.2mm

Product Weight: 1.8g

Contact us
Quotations, additional product information and queries about larger quantities.
YE Sales [email protected]
+358 10 2891 220

You may also need these