16mm Illuminated Pushbutton - Green

Out of stock
SKU: ADA1443
€2.05 €1.65 Excl. Tax Incl. Tax
Contact us
Quotations, additional product information and queries about larger quantities.
YE Sales [email protected]
+358 10 2891 220
Weight 4.5 g
Unit of measure Pcs
Product number ADA1443
Part number ADA1443
Brand Name ADAFRUIT

Espoo

By order

Delivery time: 30 business days

Pcs
€0.00 €0.00 Excl. Tax Incl. Tax
Description

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.

The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.

This particular button has a green body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.

Technical information
  • Max Dimensions: 18.06mm x 18mm x 29.4mm
  • Shaft Dimensions: 14.89mm x 15.56mm x 18.7mm
  • Button Height: 5mm
  • Button Height Depressed: 3.5mm
  • Weight: 4.6g
Description
Technical information

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.

The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.

This particular button has a green body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.

  • Max Dimensions: 18.06mm x 18mm x 29.4mm
  • Shaft Dimensions: 14.89mm x 15.56mm x 18.7mm
  • Button Height: 5mm
  • Button Height Depressed: 3.5mm
  • Weight: 4.6g
Contact us
Quotations, additional product information and queries about larger quantities.
YE Sales [email protected]
+358 10 2891 220

You may also need these