Finnish / fi English / en

SparkFun Electronics LCD-00258 | SparkFun Serial Enabled LCD Backpac

Toimittajan tuotekoodi: LCD-00258
Tuotenumero: LCD-00258
Valmistaja: SparkFun Electronics
Yksikkö: kpl
Pakkaus: 1
Paino: 0.01 kg
Saatavuus: Toimitusaika 2-3 päivää
Yksikköhinta ilman veroja: 16.95€
Määrä:
Viro: 2
Yhteensä: 2
Lisää ostoskoriin
Määrä:

The SparkFun Serial Enabled LCD Backpack allows you to control a parallel based LCD over a single-wire serial interface. The SerLCD backpack takes care of all the HD44780 commands allowing seamless integration with any micro that can communicate over a wide range of TTL serial baud rates. The SerLCD currently supports 16 and 20 character wide screens with 2 or 4 lines of display.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power, ground and RX pins are all broken out to a 3.5mm pitch screw terminal.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the backpack to adjust the contrast.

Note: The SerLCD v2.5 Datasheet incorrectly identifies the PIC as a 16F688, when it’s actually a 16LF88. Sorry for blowing your mind.

Features:

  • PIC 16LF88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off via firmware
  • User definable splash screen

Documents:

Dimensions: 14.2 x 44.5 mm